35# Teflon extruder

TF-Ф35 Teflon extruder

Equipment Configuration and Technical Specifications

A.  Equipment Usage

This equipment is suitable for the production of fluoroplastics such as FEP (polyfluoroethylene propylene, also known as F46), FPA (oxidized alkoxyethylene resin), and ETFE (also known as F40).

B. Main specifications

1. Manufacturing line type: used for producing high-temperature insulation wires such as FEP, FPA, ETFE, TEFLON, etc.

2. Ejection material: Suitable for fluoroplastics such as FEP (polyfluoroethylene propylene, also known as F46), FPA (oxidized alkoxyethylene resin), and ETFE (also known as F40).

3. Conductor diameter: 0.35-2.0mm. (The size of the wire diameter needs to be equipped with corresponding molds)

4. Suitable wire diameter:Ф0.5mm~Ф2.5mm.

5. Maximum line speed: Teflon: 0-150m/min;

6. Center height: 1000mm.

7. Power supply: 380V+10% 50HZ three-phase five wire system

8. Operation direction: host (from to operation)

9. Machine color: Overall appearance: Apple green; Bright blue.

C. Main components:

1. Active pay-off rack: 1 set

2. Fully automatic copper wire preheater: 1 set

3. Straightening table: 1 set

4. 35 # host (dryer, suction machine): 1 set

5. PLC computer-based control system: 1 set

6. mobiles sink and fixed sink: 1 set

7. Laser diameter measuring instrument: 1 set

8. Tension storage rack: 1 set

9. High frequency spark testing machine: 1 set

10. Closed double wheel extractor: 1 set

11. Electronic meter counter: 1 set

12. Dual axis take-up machine: 1 set

13. Random spare parts and operation and maintenance instructions: 1 set

14. Complete machine painting: 1 set